2. Building Documentation¶

To create a rendered copy of this documentation locally you can use the Sphinx tool to build and package the plain-text documents into HTML-formatted pages.

If you are building the documentation for the first time then you will need to check that you have the required software packages, as described in the Prerequisites section that follows.

Note

An online copy of the documentation is available at https://www.trustedfirmware.org/docs/tf-a, if you want to view a rendered copy without doing a local build.

2.1. Prerequisites¶

For building a local copy of the TF-A documentation you will need, at minimum:

Python 3 (3.5 or later)
PlantUML (1.2017.15 or later)

You must also install the Python modules that are specified in the requirements.txt file in the root of the docs directory. These modules can be installed using pip3 (the Python Package Installer). Passing this requirements file as an argument to pip3 automatically installs the specific module versions required by TF-A.

An example set of installation commands for Ubuntu 18.04 LTS follows, assuming that the working directory is docs:

sudo apt install python3 python3-pip plantuml
pip3 install [--user] -r requirements.txt

Note

Several other modules will be installed as dependencies. Please review the list to ensure that there will be no conflicts with other modules already installed in your environment.

Passing the optional --user argument to pip3 will install the Python packages only for the current user. Omitting this argument will attempt to install the packages globally and this will likely require the command to be run as root or using sudo.

Note

More advanced usage instructions for pip are beyond the scope of this document but you can refer to the pip homepage for detailed guides.

2.2. Building rendered documentation¶

From the docs directory of the project, run the following commands. It is important to note that you will not get the correct result if the commands are run from the project root directory, as that would invoke the top-level Makefile for TF-A itself.

make clean
make html

Output from the build process will be placed in:

<tf-a root>/docs/build/html/