7.20. NXP i.MX 8M Series
The i.MX 8M family of applications processors based on Arm Corte-A53 and Cortex-M4 cores provide high-performance computing, power efficiency, enhanced system reliability and embedded security needed to drive the growth of fast-growing edge node computing, streaming multimedia, and machine learning applications.
imx8mq is dropped in TF-A CI build due to the small OCRAM size, but still actively maintained in NXP official release.
7.20.1. Boot Sequence
Bootrom –> SPL –> BL31 –> BL33(u-boot) –> Linux kernel
7.20.2. How to build
126.96.36.199. Build Procedure
Prepare AARCH64 toolchain.
Build spl and u-boot firstly, and get binary images: u-boot-spl.bin, u-boot-nodtb.bin and dtb for the target board.
CROSS_COMPILE=aarch64-linux-gnu- make PLAT=<Target_SoC> bl31
Target_SoC should be “imx8mq” for i.MX8MQ SoC. Target_SoC should be “imx8mm” for i.MX8MM SoC. Target_SoC should be “imx8mn” for i.MX8MN SoC. Target_SoC should be “imx8mp” for i.MX8MP SoC.
188.8.131.52. Deploy TF-A Images
TF-A binary(bl31.bin), u-boot-spl.bin u-boot-nodtb.bin and dtb are combined together to generate a binary file called flash.bin, the imx-mkimage tool is used to generate flash.bin, and flash.bin needs to be flashed into SD card with certain offset for BOOT ROM. the u-boot and imx-mkimage will be upstreamed soon, this doc will be updated once they are ready, and the link will be posted.
7.20.3. TBBR Boot Sequence
When setting NEED_BL2=1 on imx8mm. We support an alternative way of boot sequence to support TBBR.
Bootrom –> SPL –> BL2 –> BL31 –> BL33(u-boot with UEFI) –> grub
This helps us to fulfill the SystemReady EBBR standard. BL2 will be in the FIT image and SPL will verify it. All of the BL3x will be put in the FIP image. BL2 will verify them. In U-boot we turn on the UEFI secure boot features so it can verify grub. And we use grub to verify linux kernel.
7.20.4. Measured Boot
When setting MEASURED_BOOT=1 on imx8mm we can let TF-A generate event logs with a DTB overlay. The overlay will be put at PLAT_IMX8M_DTO_BASE with maximum size PLAT_IMX8M_DTO_MAX_SIZE. Then in U-boot we can apply the DTB overlay and let U-boot to parse the event log and update the PCRs.
7.20.5. High Assurance Boot (HABv4)
All actively maintained platforms have a support for High Assurance Boot (HABv4), which is implemented via ROM Vector Table (RVT) API to extend the Root-of-Trust beyond the SPL. Those calls are done via SMC and are executed in EL3, with results returned back to original caller.
184.108.40.206. Note on DRAM Memory Mapping
There is a special case of mapping the DRAM: entire DRAM available on the platform is mapped into the EL3 with MT_RW attributes.
Mapping the entire DRAM allows the usage of 2MB block mapping in Level-2 Translation Table entries, which use less Page Table Entries (PTEs). If Level-3 PTE mapping is used instead then additional PTEs would be required, which leads to the increase of translation table size.
Due to the fact that the size of SRAM is limited on some platforms in the family it should rather be avoided creating additional Level-3 mapping and introduce more PTEs, hence the implementation uses Level-2 mapping which maps entire DRAM space.
The reason for the MT_RW attribute mapping scheme is the fact that the SMC API to get the status and events is called from NS world passing destination pointers which are located in DRAM. Mapping DRAM without MT_RW permissions causes those locations not to be filled, which in turn causing EL1&0 software not to receive replies.
Therefore, DRAM mapping is done with MT_RW attributes, as it is required for data exchange between EL3 and EL1&0 software.
220.127.116.11. Reference Documentation
Details on HABv4 usage and implementation could be found in following documents:
AN4581: “i.MX Secure Boot on HABv4 Supported Devices”, Rev. 4 - June 2020
AN12263: “HABv4 RVT Guidelines and Recommendations”, Rev. 1 - 06/2020
“HABv4 API Reference Manual”. This document in the part of NXP Code Signing Tool (CST) distribution.